Function description

Passive infra-red presence detector for flush-mounted ceiling installation
Square detection area 360°, 7 x 7 m, (49 m²) at mounting height 3 m
1 channel light (Relay, 230 V) and 1 channel presence (Relay, floating for HVAC control)
Automatic presence- and brightness-dependent control for lighting and HVAC
Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs
Choice of fully or semi-automatic operation
Adjustable brightness switching value, teach-in function
Self-learning time delay
Reduction of switch-off delay time in the event of short presence (brief-presence)
Connection option for sensors or switches for manual switching with automatic recognition of sensor/switch

Pulse function for staircase light time switch
Channel H, presence: relay, floating e.g. for HVAC control
Switch-on delay and switch-off delay configurable
Room monitoring with selective movement detection
Ready for immediate use due to factory preset
Exceptionally easy configuration of the energy-saving behaviour with the new «eco plus» function
Test mode for checking function and detection area
Extension of detection area via Master/Slave or Master/Master switching, a maximum of 10 detectors can be switched in parallel with each other
Flexible relay operating modes
Ceiling installation in flush-mounted socket
Ceiling installation also possible with surface-mounted frame
User remote control theSenda S, management remote control SendoPro (optional)
* According to warranty terms and conditions, see www.theben.de/en/guarantee

Technical data

Operating voltage	110 V AC - 230 V AC ± 10 %
Frequency	50 - 60 Hz
Installation height	2 - 3 m
Minimum height	1.7 m
Installation type	Ceiling installation
Colour	Grey
Power consumption	~0.1 W
Light measurement	Mixed light measurement
Setting range brightness	5 - 3000 lx
Light switch-off delay	10 s - 60 min
Type of contact light	Relay 230 V/10 A µ-contact
Lamp types	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Incandescent/halogen lamp load	2300 W
Compact and flourescent lamps	1150 VA (cos φ = 0,5)
Inrush current	max. 800 A / 200 µs
Energy saving lamps	16 x 54/58 W, 24 x 35/36 W, 8 x 2 x 54/58 W, 12 x 2 x 35/36 W
LED lamp < 2 W	60 W
LED lamp 2-8 W	600 W
LED lamp > 8 W	600 W
Switch-on delay presence	0 s - 10 min / Room surveillance
Presence switch-off delay	10 s - 120 min
Type of contact presence	Relay potential-free
Switching capacity presence	50 W / 50 VA (max. 2 A), min. 0,5 mV / 10mA
Type of connection	Screw terminals
Max. cable cross section	max. 2 x 2,5 mm²
Size of concealed housing	55 mm
Switching output	Light \| Presence
Detection range	49 m² (7,0 x 7,0 m)
Detection angle	360°
Ambient temperature	0°C ... 50°C
Impact resistance	IK04
Type of protection	IP 40 (when fitted)

Tender text	DOC	thePrema S360-101 E (59,9 kB)
Operating instructions (Smartphone)	PDF	thePrema S360-101 E_mobil (1,5 MB)
Operating instructions	PDF	thePrema S360-101 E (4,3 MB)
Data sheet	PDF	thePrema S360-101 E UP GR (1,5 MB)
BIM data		Open planning data in web app