LED Mini Dimmer DIMAX 540 plus B
The UP Mini Dimmer DIMAX 540 plus B measures just 26.4 x 25.5 x 10.4 mm. This makes it barely bigger than a two-euro coin. The 230 V mini dimmer for R and C loads does not require a neutral conductor and is simply mounted behind a standard push-button, making it perfect for retrofitting. If, for example, there is not enough space behind a built-in light switch to install a dimmer during a renovation or if there is no neutral conductor, the mini dimmer can be used. Thanks to its minimal housing, it fits into any switch box.
NEW! For up to 100m cable length
This means that the DIMAX 540 plus B is also suitable for alternating circuits with larger distances and several push-buttons.
NEW! Convenient dimming speed
We have responded to customer feedback and increased the dimming speed (0 to 100%) from 3.5 seconds to 5 seconds.
NEW! Attractive color
Following the clear vote of our installer community, we have designed the new "Dimmerle" in RAL 1026 (neon yellow).
Small design
The DIMAX 540 plus B flush-mounted dimmer for R and C loads is hardly bigger than a two-euro coin:
It is simply mounted behind a standard push-button and is therefore perfect for retrofitting.
Perfect for LEDs: Thanks to adjustable minimum brightness
The attractively priced 2-wire flush-mounted dimmer offers optimised settings for LEDs and is compatible with dimmable LEDs from 2-150 W (phase section).
Thanks to the adjustable minimum brightness, you can ensure that your LED lights up or switches off safely and exclude a possible defect.
Safe is safe
The tiny device with completely encapsulated electronics does not require a neutral conductor and offers the highest level of fire protection thanks to temperature and overcurrent shutdown as well as a short-circuit protection.
Practical memory function
The memory function saves the last light value set and dims to this value the next time it is switched on.
And with a double click, the dimmer switches the lamp to 100%.
.
The most important technical data at a glance:
-
Operating voltage: 230 V AC
-
Frequency: 50-60 Hz
-
Mounting type: Flush-mounted
-
Stand-by power: 0,34W
-
Incandescent-/halogen lamp load: 150 W
-
LED luminaire: 150 W (Phase section)
-
Ambient temperature: -10°C to 45°C
-
Dimensions: 26,4 (H) x 25,5 (B) x 10,4 mm (T)
Functional description
- Flush-mounted dimmer for R and C loads (phase section only)
- Optimised settings for LEDs
- Adjustable minimum brightness
- Memory function, saves the last set light value and dims to this value the next time it is switched on
- 100% brightness with double print
- Completely encapsulated electronics
- No neutral conductor necessary
- Small design, perfect for retrofitting
- Temperature cut-off
- Overcurrent shutdown
- Short-circuit fuse
Dimensioned drawing:
Technical data and functional descriptions:
Dimmer:
Accessories:
